When you are trying to dry your clothes with the Whirlpool dryer, you might assume that the dryer is not working as your clothes are still wet even after you put them on for a quite long time. If you are wondering why your Whirlpool dryer is not drying your clothes, there are some possible reasons why it happens, including:
You wash too many clothes
The drying times can be extended if you wash too many clothes at the same time in the same dryer. Having too many clothes in the same dryer blocks the warm air from circulating properly. That’s why some items are wet after a single drying cycle.
If you have no idea how many clothes that you can put into a Whirlpool dryer at the same time, you are recommended to fill the machine ¾ of the way with just one wash load full. Following the tip is proven to be helpful to allow for the optimal circulation. Actually, it may be different depending on the model of the dryer so please check out the use and care manual to get the specific recommendations.
The clothes that you wash are too wet
In some cases, the main issue is not actually the Whirlpool dryer not drying, it is the washer that does not do its job to wash the clothes properly. If you choose a wash setting without a spin cycle or insufficient spinning, your clothes will be too wet when the cycle is complete. Not only that, the clothes can be wet after washing if there is something wrong with the washer. If your clothes are too wet, it is not surprising that drying takes a longer time compared to usual or you will find your Whirlpool dryer not doing its job to dry your clothes in one cycle. It is why it is important for you to choose a wash setting with a sufficient spin cycle in order to reduce the moisture on the clothes before drying. If after being washed the clothes are still too wet, it might be a sign that you need to repair the washer.
Dryer lint filter is dirty
The clothing fibers can break down due to the heat and tumbling of a dryer, resulting in a little clump that is known as lint. Usually, most lint ends up in the lint filter of the dryer in order to prevent it from clogging the dryer vents. However, if the lint blocks the lint filter, the circulation of the warm air of the dryer can be limited, which may result in the clothes getting wet at the end of the drying cycle. In order to prevent the lint from building up, it is better for you to empty the link at the end of every drying cycle. If you have no idea how to do it, you can pull the lint screen from its compartment and then remove the lint by using your hand or a paper towel.
Dryer vents need to be cleaned
Even after cleaning your lint filter regularly, the lint can still find the way to the dryer vents. The airflow to the dryer will be restricted by the dryer vent that is clogged with the lint. Besides, it will also increase the drying times. Apart from that, the airflow can also be limited by a kink in the dryer vent so the time to dry clothes will be longer.
If you want to prevent the clogs and keep your dryer to do its job well, you are suggested to clean out dryer vents every year with these dryer vent cleaning tips. It is guaranteed that it is effective. When cleaning, do not forget to inspect the vent system in order to make sure that it is placed correctly. In addition, making sure that it is positioned well is also useful to make sure that it is not crushed or kinked. If you find a vent that is damaged, do not wait any longer and just replace it as soon as possible.
If after following these troubleshooting tips the issue is still there, it is safe to say that there is something wrong with a certain part. There is a high chance of these components to cause the Whirlpool dryer to not dry the clothes properly and to fix the issue, a professional service is required.
- Heating element: For the electric dryers, the heating element is the one that provides the heat to the dryer. This one consists of electric wires that produce the heat when they get an electric signal. When the element does not work properly, there is no way for the dryer to produce the warm air. In this case, the element has to be replaced.
- Gas valve solenoid: In the gas dryers, there is a set of the gas valve solenoids that is open, allowing the gas to go to the burner. It is also able to heat the dryer. Usually, the igniter of the dryer is a sign that there is an issue with the gas valve when it cannot ignite the burner. If this kind of thing happens, it will be needed for you to replace the set of gas valve solenoids.
Whether you use a gas or electric Whirlpool dryer, the troubleshooting does not always involve a malfunction or repair. There are some common causes that are usually able to be fixed easily, including the ones that have been mentioned above.
If you are having a hard time due to Whirlpool dryer not drying clothes properly, you might want to contact Whirlpool. If you are from the United States, you can dial the number 1-866-698-2538. If you are from Canada, please use the number 1-800-807-6777 instead. According to the official website of Whirlpool, these phone numbers are available from Monday to Friday. If you call on Monday or Tuesday, you can call at 8:00 AM to 8:00 PM EST. As for the Wednesday to Friday, the office hours include 9:00 AM to 7:00 PM EST.